Material Properties

Material properties define how a material responds to mechanical, thermal, and environmental conditions.


Strength Properties

Yield Strength (σ_y)

Stress at which material begins to deform plastically.

  • Below yield: elastic (reversible) deformation
  • Above yield: plastic (permanent) deformation
  • Units: MPa or ksi

Ultimate Tensile Strength (σ_uts)

Maximum stress reached during tensile test.

  • Peak of engineering stress-strain curve
  • Indicates maximum load-bearing capacity
  • Not the same as true stress at failure

Shear Strength (τ)

Maximum shear stress before failure.

τmax=0.5⋅σuts (for ductile metals)\tau_{max} = 0.5 \cdot \sigma_{uts} \text{ (for ductile metals)}


Elastic Properties

Young's Modulus (E)

Slope of elastic region in stress-strain curve.

  • Measures stiffness
  • ~200 GPa for steel, ~70 GPa for aluminum

Shear Modulus (G)

G=E2(1+ν)G = \frac{E}{2(1+\nu)}

Poisson's Ratio (ν)

ν=−εlateralεaxial\nu = -\frac{\varepsilon_{lateral}}{\varepsilon_{axial}}

  • Typically 0.25-0.35 for metals
  • 0.5 for incompressible materials (rubber)

Ductility

Ability to deform plastically before failure.

Elongation (%EL)

%EL=Lf−L0L0×100\%EL = \frac{L_f - L_0}{L_0} \times 100

  • 20% = ductile

  • <5% = brittle

Reduction of Area (%RA)

%RA=A0−AfA0×100\%RA = \frac{A_0 - A_f}{A_0} \times 100


Hardness

Resistance to localized plastic deformation.

Test Scale Typical Use
Brinell (HB) 500 kg load Castings, forgings
Rockwell (HRC/HRB) Scale-specific Heat-treated steel
Vickers (HV) 1-1200 kg All metals
Microhardness <1 kg Thin sections, coatings

Toughness

Ability to absorb energy before fracture.

Impact Toughness

  • Charpy — energy to break notched specimen
  • Izod — similar, different mounting

Fracture Toughness (K_IC)

Critical stress intensity for crack propagation.

KIC=YσπaK_IC = Y\sigma\sqrt{\pi a}

  • Y = Geometry factor
  • a = Crack length
  • Units: MPa√m

Other Properties

Property Symbol Description
Density ρ Mass per unit volume (kg/m³)
Thermal conductivity k Heat flow rate
Specific heat C Heat capacity
Thermal expansion α Strain per °C
Creep — Time-dependent strain at high T