Fatigue & S-N Curves
Fatigue is progressive, localized structural damage under cyclic loading. Failure occurs at stresses below yield strength.
Fatigue Failure Process
- Crack initiation — at stress concentrations (notches, surface defects)
- Crack propagation — stable crack growth per cycle
- Sudden fracture — catastrophic failure when remaining area can't carry load
S-N Curves
Stress vs. Number of cycles to failure.
Terminology
- S = Stress amplitude
- N = Cycles to failure
- S_f = Fatigue strength at N cycles
Key Fatigue Parameters
Stress Ratio (R)
Stress Amplitude (σ_a)
Mean Stress (σ_m)
S-N Curve Regions
High-Cycle Fatigue (HCF)
- N > 10⁴ cycles
- Stress below yield
- Elastic deformation
Low-Cycle Fatigue (LCF)
- N < 10⁴ cycles
- Plastic deformation per cycle
- Strain-based analysis
Fatigue Limits
Fatigue Limit (S_e)
Stress below which material never fails (theoretical infinite life).
| Material | S_e (approx) |
|---|---|
| Steel | 0.5 × σ_uts |
| Aluminum | No true limit |
| Titanium | 0.4 × σ_uts |
Fatigue Strength (S_f)
Stress at a specific N (e.g., 10⁶ or 10⁷ cycles).
Modifications to S-N
Mean Stress Effects
Goodman Relation:
** Gerber Relation:**
Factors Affecting Fatigue Life
| Factor | Effect |
|---|---|
| Surface finish | Rough surfaces reduce life |
| Size | Larger parts reduce life |
| Temperature | Elevated T reduces life |
| Corrosion | Dramatically reduces life |
| Notches | Stress concentration |
| Residual stress | Compressive = beneficial |
Fatigue Life Estimation
Basquin's Law
- σ_f' = fatigue strength coefficient
- b = fatigue strength exponent (-0.05 to -0.12)
Coffin-Manson (Low-Cycle)
Cumulative Damage
Miner's Rule:
- n_i = cycles at stress i
- N_i = fatigue life at stress i