Hooke's Law
Hooke's Law describes the linear elastic behavior of materials — stress is proportional to strain within the elastic limit.
The Basic Equation
- σ = Normal stress (MPa)
- ε = Normal strain (dimensionless)
- E = Modulus of Elasticity / Young's Modulus (GPa)
Also written as:
Where k is the stiffness constant.
Material Stiffness (E)
| Material | E (GPa) |
|---|---|
| Steel | 200 |
| Aluminum | 69 |
| Titanium | 110 |
| Copper | 117 |
| Glass | 70 |
| CFRP | 150-200 |
Shear Hooke's Law
For shear stress and strain:
- τ = Shear stress
- γ = Shear strain
- G = Shear modulus (GPa)
Relationship Between E and G
For isotropic, linear elastic materials:
- ν = Poisson's ratio (≈ 0.3 for metals)
Poisson's Ratio
Lateral strain to axial strain ratio:
| Material | ν |
|---|---|
| Steel | 0.30 |
| Aluminum | 0.33 |
| Rubber | 0.49 |
| Cork | 0.00 |
3D Generalized Hooke's Law
For isotropic materials under multi-axial stress:
Limitations
- Only valid in the elastic region (below yield)
- Assumes linear relationship
- Assumes isotropic material (same properties in all directions)
- Does not account for time-dependent effects (viscoelasticity)