Types of Loads

Loads are forces applied to a structure or component. Understanding load types is essential for analyzing and designing mechanical systems.


By Direction of Application

Axial Loads

Force acts along the axis of the member.

  • Tensile — pulls apart (positive F)
  • Compressive — pushes together (negative F)

σ=FA\sigma = \frac{F}{A}

Shear Load

Force acts parallel to the cross-section, tending to slice the material.

τ=VA\tau = \frac{V}{A}

  • V = Shear force
  • A = Cross-sectional area

Torsional Load

Twisting moment applied about the longitudinal axis.

τ=T⋅rJ\tau = \frac{T \cdot r}{J}

  • T = Torque
  • r = Radius from center
  • J = Polar moment of inertia (πd⁴/32 for circular)

Bending Load

Creates curvature — produces both normal stress and shear stress.

σ=M⋅yI\sigma = \frac{M \cdot y}{I}

  • M = Bending moment
  • y = Distance from neutral axis
  • I = Second moment of area

By Time Variation

Static Load

Constant or slowly applied. No significant dynamic effects.

Fatigue / Cyclic Load

Repeated loading/unloading over time. Can cause failure below yield strength.

Impact Load

Sudden, high-rate application. Creates stress waves and dynamic amplification.

Random Load

Variable amplitude and frequency (e.g., automotive suspension, aircraft).


By Distribution

Concentrated (Point) Load

Force applied at a specific point.

Distributed Load

Force spread over an area or length.

  • Uniform — constant magnitude
  • Varying — changes along length (triangular, trapezoidal)

w(x)=dVdxw(x) = \frac{dV}{dx}


Load Combinations

Structures typically experience multiple load types simultaneously. Common combinations:

  • D + L — Dead load + Live load
  • D + L + W — Dead + Live + Wind
  • D + L + E — Dead + Live + Earthquake

Design codes (ASME, Eurocode, etc.) specify load factors for each combination.