Material Properties
Material properties define how a material responds to mechanical, thermal, and environmental conditions.
Strength Properties
Yield Strength (σ_y)
Stress at which material begins to deform plastically.
- Below yield: elastic (reversible) deformation
- Above yield: plastic (permanent) deformation
- Units: MPa or ksi
Ultimate Tensile Strength (σ_uts)
Maximum stress reached during tensile test.
- Peak of engineering stress-strain curve
- Indicates maximum load-bearing capacity
- Not the same as true stress at failure
Shear Strength (τ)
Maximum shear stress before failure.
Elastic Properties
Young's Modulus (E)
Slope of elastic region in stress-strain curve.
- Measures stiffness
- ~200 GPa for steel, ~70 GPa for aluminum
Shear Modulus (G)
Poisson's Ratio (ν)
- Typically 0.25-0.35 for metals
- 0.5 for incompressible materials (rubber)
Ductility
Ability to deform plastically before failure.
Elongation (%EL)
-
20% = ductile
- <5% = brittle
Reduction of Area (%RA)
Hardness
Resistance to localized plastic deformation.
| Test | Scale | Typical Use |
|---|---|---|
| Brinell (HB) | 500 kg load | Castings, forgings |
| Rockwell (HRC/HRB) | Scale-specific | Heat-treated steel |
| Vickers (HV) | 1-1200 kg | All metals |
| Microhardness | <1 kg | Thin sections, coatings |
Toughness
Ability to absorb energy before fracture.
Impact Toughness
- Charpy — energy to break notched specimen
- Izod — similar, different mounting
Fracture Toughness (K_IC)
Critical stress intensity for crack propagation.
- Y = Geometry factor
- a = Crack length
- Units: MPa√m
Other Properties
| Property | Symbol | Description |
|---|---|---|
| Density | ρ | Mass per unit volume (kg/m³) |
| Thermal conductivity | k | Heat flow rate |
| Specific heat | C | Heat capacity |
| Thermal expansion | α | Strain per °C |
| Creep | — | Time-dependent strain at high T |