Stress & Strain

Stress

Stress is the internal resistance of a material to an applied force, measured as force per unit area.

σ=FA\sigma = \frac{F}{A}

  • σ = Normal stress (MPa or psi)
  • F = Applied force (N or lb)
  • A = Cross-sectional area (mm² or in²)

Types of Stress

Type Description
Tensile Pulling force — material stretches
Compressive Pushing force — material compresses
Shear Parallel forces in opposite directions
Torsional Twisting moment

Strain

Strain is the measure of deformation (change in dimension) relative to the original dimension.

ε=ΔLL0\varepsilon = \frac{\Delta L}{L_0}

  • ε = Strain (dimensionless, often expressed as % or µε)
  • ΔL = Change in length
  • L₀ = Original length

Types of Strain

  • Normal strain — change in length
  • Shear strain — angular deformation (γ)

Stress Transformation

For a given stress state, normal and shear stress on an inclined plane at angle θ:

σn=σx+σy2+σx−σy2cos⁡(2θ)\sigma_n = \frac{\sigma_x + \sigma_y}{2} + \frac{\sigma_x - \sigma_y}{2}\cos(2\theta)

τ=σx−σy2sin⁡(2θ)\tau = \frac{\sigma_x - \sigma_y}{2}\sin(2\theta)

Principal stresses occur at:

tan⁡(2θp)=2τxyσx−σy\tan(2\theta_p) = \frac{2\tau_{xy}}{\sigma_x - \sigma_y}