Hooke's Law

Hooke's Law describes the linear elastic behavior of materials — stress is proportional to strain within the elastic limit.


The Basic Equation

σ=E⋅ε\sigma = E \cdot \varepsilon

  • σ = Normal stress (MPa)
  • ε = Normal strain (dimensionless)
  • E = Modulus of Elasticity / Young's Modulus (GPa)

Also written as:

F=k⋅xF = k \cdot x

Where k is the stiffness constant.


Material Stiffness (E)

Material E (GPa)
Steel 200
Aluminum 69
Titanium 110
Copper 117
Glass 70
CFRP 150-200

Shear Hooke's Law

For shear stress and strain:

τ=G⋅γ\tau = G \cdot \gamma

  • τ = Shear stress
  • γ = Shear strain
  • G = Shear modulus (GPa)

Relationship Between E and G

For isotropic, linear elastic materials:

G=E2(1+ν)G = \frac{E}{2(1 + \nu)}

  • ν = Poisson's ratio (≈ 0.3 for metals)

Poisson's Ratio

Lateral strain to axial strain ratio:

ν=−εlateralεaxial\nu = -\frac{\varepsilon_{lateral}}{\varepsilon_{axial}}

Material ν
Steel 0.30
Aluminum 0.33
Rubber 0.49
Cork 0.00

3D Generalized Hooke's Law

For isotropic materials under multi-axial stress:

εx=1E[σx−ν(σy+σz)]\varepsilon_x = \frac{1}{E}[\sigma_x - \nu(\sigma_y + \sigma_z)]

εy=1E[σy−ν(σx+σz)]\varepsilon_y = \frac{1}{E}[\sigma_y - \nu(\sigma_x + \sigma_z)]

εz=1E[σz−ν(σx+σy)]\varepsilon_z = \frac{1}{E}[\sigma_z - \nu(\sigma_x + \sigma_y)]


Limitations

  • Only valid in the elastic region (below yield)
  • Assumes linear relationship
  • Assumes isotropic material (same properties in all directions)
  • Does not account for time-dependent effects (viscoelasticity)