GD&T
Geometric Dimensioning and Tolerancing (GD&T) is a symbolic language for defining geometric tolerances on engineering drawings.
Benefits
- Unambiguous communication of design intent
- Maximizes tolerances while ensuring function
- Enables statistical tolerancing
- Worldwide standard (ASME Y14.5, ISO 1101)
Fundamentals
Feature Control Frame
┌─────┬─────┬─────┬─────┐
│ ☐ │ Ø │ 0.1 │ A │
│Sym │Type │Tol │ Datum│
└─────┴─────┴─────┴─────┘
Geometric Characteristics
| Symbol | Type | Name | Controls |
|---|---|---|---|
| ☐ | Form | Flatness | Surface deviation |
| ☐ | Form | Straightness | Line element |
| ○ | Form | Circularity | Roundness |
| ☐ | Form | Cylindricity | 3D roundness + straightness |
| // | Orientation | Parallelism | Angle to datum |
| ⟂ | Orientation | Perpendicularity | 90° to datum |
| ∠ | Orientation | Angularity | Specific angle |
| ≡ | Location | Position | Location of features |
| ⌒ | Profile | Profile of Line | 2D boundary |
| ☐ | Profile | Profile of Surface | 3D boundary |
| ↗ | Runout | Circular Runout | Radial variation |
| ↗ | Runout | Total Runout | Overall variation |
Datum Features
Primary Datum
First contact — typically the largest or most critical surface.
Secondary Datum
Second contact — usually perpendicular to primary.
Tertiary Datum
Third contact — completes the coordinate system.
Tolerance Types
Profile Tolerances
Control the boundary of a surface or line.
- Profile of Surface — 3D boundary
- Profile of Line — 2D cross-section
Position Tolerance
Location of features (holes, slots, tabs).
- Often used with ** MMC** (Maximum Material Condition)
- Virtual condition concept
Runout
Controls runout of rotating parts.
- Circular — at any single cross-section
- Total — over entire surface
Modifiers
| Symbol | Meaning |
|---|---|
| M | Maximum Material Condition |
| L | Least Material Condition |
| S | Single Segment |
| U | Unilateral |
| P | Projected Tolerance Zone |
| E | Envelope Requirement |
Example: Hole Position
Position Ø0.5 (M) │ A │ B │ C
- Ø0.5mm tolerance at Maximum Material Condition
- Referenced to datums A, B, C